 |
 |
Tech Specs
WILMAR GRAPHITE
High Performance Graphite
Lubricants
TECHNICAL SPECIFICATIONS
|
Product |
Method of Application |
Coverage |
Notes |
SLIDE COAT No. 1 |
|||
|
11004 Quart
11001 Gallon
11005 5-Gal. Pail |
Brush or spray
(note: requires dilution for spray) |
50 Sq. Ft.
200 Sq. Ft.
1000 Sq. Ft |
·
Three coats recommended
·
First coat needs to cure for 24 hours |
E-Z SLIDE L/F |
|||
|
11204 Quart
11201 Gallon
11205 5-Gal. Pail |
Spray
(note: NO dilution required for spray) |
50 Sq. Ft.
200 Sq. Ft.
1000 Sq. Ft |
·
Fast drying
·
Tack free within minutes
·
Cured within an hour |
SLIDE COAT Aerosol |
|||
|
11203 Aerosol |
Spray |
9 Sq. Ft. |
·
Fast drying
·
Tack free within minutes
·
Cured within an hour |
CLEAN DECK |
|||
|
10164 Quart
10160 Aerosol |
Brush
Spray |
Small decks - up to 48”
Large decks –equal to or greater than 48” |
·
Three coats recommended
·
First coat needs to cure for 24 hours |
SEED FLOW |
|||
|
SF1
1 lb.
SF5 5 lb. |
Sprinkle in with seeds
Sprinkle in with seeds |
1lb
container should cover ~8 applications
5lb container should cover ~40 applications depending on
size of hopper/planter box
|
·
Environmentally friendly |
Notes:
1. Graphite should not be used in ignition switches or other electrically activated locks
2. Specifications relating to coverage and
lifespan are approximations -- actual specifications
are dependent on application, environment and size of
equipment treated.
Natural graphite is a high temperature, dry solid lubricant that
performs at extreme pressures and high temperatures. Used to fortify
greases and oils, graphite leaves a lubricating residue as the
carrier evaporates for long lasting lubrication Natural graphite
acts as an excellent conductor of heat and electricity and won’t
impede equipment performance. Wilmar offers a broad variety of
grades and container sizes to serve numerous applications.
FLAKE GRAPHITE
Sized for loose and medium
tolerance applications,
Wilmar’s
natural graphite flakes are available in large and medium sized
variants:
#1 Large (+50 mesh) Large ground graphite is available
in 1 and 5-lb cans and 25
lb drums.
#2 Medium (+200
mesh) Medium ground graphite is available in 1 and 5-lb cans and 25
lb drums.
GROUND GRAPHITE
Sized for close tolerance applications Wilmar’s ground graphite flakes are available in fine and extra-fine sized variants:
635 #3 (-200 mesh) Fine ground graphite is available
in 1 and 5-lb cans and 25
lb drums. Microfyne (-325 mesh) Extra-fine ground graphite is
available in 1 and 4-lb cans and 25 lb drums.
AMORPHOUS GRAPHITE
Highly economical, 80% pure, polycrystalline
extra-fine, graphite powder delivers more graphite than found in
competing brands Slightly less pure than flake graphite, amorphous
graphite is ideal for large-scale applications; the combination of
high graphite content and low ash provides both lubrication and
light cleaning.
620/205 Amorphous (-325 mesh)
Fine
ground graphite is available in 1 and 5-lb cans and 25 lb drums.
LUBE TUBE
Extra-fine, multi-purpose powder lubricant for small
space application in an easy to use 6 gm. tube.
TECHNICAL SPECIFICATIONS
|
OILS |
|||
|
Product |
Method of Application |
Coverage |
Notes |
FREE UP
|
|||
|
15011
Gallon
15001
Aerosol |
Brush
Spray |
~50 Sq. Ft
~ 9 Sq. Ft |
·
Four coats recommended for chains |
GRAPHITE POWDERS
|
|||
AMORPHOUS GRAPHITE
|
|||
|
L6201
1lb can
L6205
5lb can
L62025D 25lb drum |
Add to: oils and grease for long lasting lubrication |
Ratio of product to additive: up to 1:4 |
·
Slightly less pure than flake |
LUBE TUBE
|
|||
|
L300
6 Gm Tube |
Topical application (squeeze tube) |
Approximately 25 applications |
·
Use dry |
Notes:
1. Graphite should not be used in ignition switches or other electrically activated locks.
2. Specifications relating
to coverage and lifespan are approximations -- actual specifications
are dependent on application, environment and size of
equipment treated.
WILMAR GRAPHITE, INC.
Based in Ball Ground, GA USA, Wilmar Graphite Inc., is a broad-based distributor of graphite lubricant products to the agricultural, transportation, home improvement and industrial markets. With more than 50 years experience in the graphite industry and thousands of satisfied customers, Wilmar complements its best-in-class products with a comprehensive customer support program that ensures on time product delivery and delivers in-depth technical support across a wide range of applications and technologies.
To
discuss your application requirements or obtain technical assistance
contact:
Wilmar
Graphite, Inc.
251 Bethany Farms Drive
Ball Ground, Georgia 30107
Tel: 888-211-4754
Fax: 877-211-0727
Email: billbagot@earthlink.net